Skip to content
Welcome to our New XADO UK online shop. If you are an existing customer login with your email address and reactivate your account by setting a new password.
Welcome to our New XADO UK online shop. Existing customer login with your email address and reactivate your account by setting a new password.

Knocking of hydraulic lifters

xado uk piston engine hydraulic liftersIf the engine hasn’t been working for a long time, you may hear typical sounds (repeated clatter) of the hydraulic lifters when the engine first starts. When the engine operates normally, such sounds disappear after the engine warms up, but malfunctioning hydraulic lifters continue knocking. Such strange sounds can be caused by jet contamination and/or wear of hydraulic lifters. It is important to clean the assembly first, as it can help to identify the reason for knocking. If the sound is caused by contamination, knocking will stop after jet cleaning. If the hydraulic lifters are worn, the sound can be eliminated by increasing the viscosity of the oil or replacing it with a thicker one. More viscous oil will help to seal the clearances. In case of severe wear of hydraulic lifters, they need to be replaced.

Suggestions

In order to clean the hydraulic lifter jets, it is advised to add XADO RED FLUSH - Engine Oil System Cleaner & Decarbonizer into the motor oil (124 to 620 miles of run).

Use Atomex Complex oil treatment, an anti-smoke additive with Revitalizant, to increase the oil viscosity. You can also use the oil with increased high-temperature viscosity. For example, you can replace the oil SAE 5W-40 with the oil SAE 5W-50.

Atomex Complex oil treatment is a fully synthetic product that is represented by the polymer thickener, which increases the viscosity of the oil and contains Revitalizant. The product is compatible with all types of motor oil and safe for turbocharging assemblies. It is applied both in gasoline and diesel engines.

Properties

  1. Increases pressure in the oil system
  2. Reduces oil consumption through burning and engine smoking
  3. Increases the viscosity of oil
  4. Prevents the engine wear in the future due to the Revitalizant compound
  5. Efficient for the internal combustion engines with a high wear rate

Application

Introduce the product, warmed up to the temperature of +25…30 °C, into the oil filler neck of the engine, warmed up to the working temperature. Idle the engine for 2-3 minutes. Drive the automobile as usual. One time application is recommended for the whole service life of the oil.

Note

The experience shows that application of AtomEX Total Engine Flush, which has soft washing properties, allows to decrease knocking of hydraulic lifters.

Previous article Oily air filter
Next article The engine is smoking
reviews
See all reviews