Contamination (fouling) of the engine
A vehicle operating for a long time and in difficult conditions, engine overheating, increased pressure in the lubrication system, and the application of low-quality motor oils lead to wear and loss of elasticity of rubber seals. As a result, oil stains may appear on the engine. Polluted oil runs contaminate the outer surface of the engine, as well as cause penetration of abrasive substances such as dust or sand into the engine. This accelerates the engine wear in general.
Also decrease of the cross-section of channel passages and regulating valves (tar deposits, slagging) of the crankcase ventilation system leads to an increase of crankcase blow-by gas pressure as well as to oil throwing through the orifice of the oil level gauge, valve cover gasket, petrol pump, tremble, etc. Accumulation of blow-by gas in the crankcase decreases the properties and composition of the motor oil. Malfunctions of the crankcase ventilation system do not significantly impact the operation of fuel and ignition systems in case if the engine uses a fuel carburettor system. If it is a modern engine with a fuel injection system, a malfunction of the crankcase ventilation system can cause a complete failure of the engine control system.
Suggestions
It is recommended to use Atomex Stop leak engine product to restore the elasticity of operating surfaces of rubber seals and eliminate oil leakages.
Use XADO Red Flush - Engine Oil System Cleaner & Decarbonizer or Vita Flush - oil system cleaner in order to maintain normal operation of the crankcase ventilation system and clean the engine oil system. It is also recommended to use TotalFlush oil additive for cleaning of engine oil system with piston ring anticarbon effect or Verylube oil system cleaner before the oil change.
To remove oil stains from the outer surface of the engine, it is recommended to use VERYLUBE Engine compartment cleaner before cleaning.
Atomex Stop leak engine is a product containing special components that restore the elasticity of sealing materials, resulting in oil leakage prevention.
Properties
- Restores elasticity and stretch ability of rubber gaskets and seals
- Stops oil leakages from the engine and prevents their reemergence in the future
- Improves "seal-metal" contact
- Eliminates the need for expensive repair
- Compatible with motor oils of all types