XADO Atomic Metal Conditioner for Marine Engines
Engine wear protection & restoration.
Innovative 3-component product of the latest nano-generation for intelligent protection against wear. Specially designed for petrol or diesel marine engines.
Everyday operation or heavy use of the motor inevitably leads to signs of wear over time. For example, on the metal surfaces in the cylinder.
The temperature of the compound before application should not be lower than +25 °С. Shake the bottle. Introduce the compound into the oil filler neck of the engine warmed up to the operating temperature. Start the engine and provide its idle operation for 3–5 minutes to evenly mix the agent with the oil in the oil system. Operate the engine in regular mode.
Product is specially developed for 4-stroke marine diesel engines. Compatible with all types of motor oils. REVITALIZATION® takes place within 20-30 hours of engine operation (1,000-1,500 km of run), it is not recommended to change oil during this period. A repeated application is recommended after ~2,000 hours of engine operation.
1 bottle (360 ml) is enough for the engine with the oil system capacity of up to 10 L. The oil level should not exceed the maximum level of the dipstick. Avoid overdosing!
can, box 360 ml Art. XA 40030
- Restores the surfaces of the engine parts and compensates for any wear.
- Return lost engine compression / throttle response
- Provides active protection against wear, overload and overheating
- Reduces noise and vibration Improves the lubricating properties of engine oil
- Lowers fuel consumption
Overview of the 3 additive components:
The XADO patented additive restores worn surfaces by forming a metal-ceramic layer at high pressure and temperature points.
2D SLIDING AGENT
Ensures ultra-light sliding between the engine parts and reduces friction losses to an absolute minimum.
Protects the engine from oil film breakage and thus additionally protects against wear.